Excavator tracks

Excavator tracks are suitable for rubber tracks on excavators. The rubber is elastic and has excellent wear resistance, which can isolate the contact between metal tracks and the road surface. In other words, the wear of metal tracks is naturally much smaller, and their service life is naturally extended! Moreover, the installation of rubber excavator tracks is relatively convenient, and the blocking of track blocks can effectively protect the ground.

Precautions for using excavator rubber tracks:

(1) Rubber tracks are only suitable for installation and use in flat road conditions. If there are sharp protrusions (steel bars, stones, etc.) on the construction site, it is very easy to cause damage to the rubber blocks.

(2) Excavator tracks must avoid dry friction, such as the use of track blocks when rubbing and walking on the edge of steps, as dry friction between these track block edges and the body can scratch and thin the track block edges.

(3) If the machine is installed with rubber tracks, it must be constructed and driven smoothly to avoid sharp turns, which can easily cause wheel detachment and track damage.
  • Rubber Tracks 300X52.5 Excavator Tracks

    Rubber Tracks 300X52.5 Excavator Tracks

    Product Detail The Feature of Rubber Track The feature of rubber tracks:  (1). Less round damage  Rubber tracks cause less damage to roads than steel tracks, and less rutting of soft ground than either steel tracks of wheel products.  (2). Low noise  A benefit to equipment operating in congested areas, rubber track products less noise than steel tracks.  (3). High speed  Rubber excavator tracks permit machines to travel at a higher speed than steel tracks.  (4). Less vibration  Ru...
  • Rubber Tracks 320X54 Excavator Tracks

    Rubber Tracks 320X54 Excavator Tracks

    Product Detail The Feature of Rubber Track Excavator tracks are new type of chassis travel used on small excavators and other medium and large construction machinery.It has a crawler-type walking part with a certain number of cores and wire rope embedded in rubber. Rubber track can be widely used in transportation machinery such as agriculture, construction and construction machinery, such as: crawler excavators, loaders, dump trucks, transport vehicles, etc. It has the advantages...
  • Rubber Tracks JD300X52.5NX86 Excavator Tracks

    Rubber Tracks JD300X52.5NX86 Excavator Tracks

    Product Detail The Feature of Rubber Track Production Process Why Choose Us Before Gator Track factory, we are AIMAX, trader for rubber tracks for over 15 years. Drawing from our experience in this field, to better serve our customers, we felt the urge to build a factory of our own, not in pursuit of quantity we can sell, but of each good track we built and make it count.   In 2015, Gator Track was founded with the help of rich experienced engineers. Our first t...
  • Rubber tracks 500X92W Excavator tracks

    Rubber tracks 500X92W Excavator tracks

    Product Detail The Feature of Rubber Track Excavator Tracks Maintenance (1) Always check the tightness of the track, in accordance with the requirements of the instruction manual, but tight, but loose. (2) At any time to clear the track on the mud, wrapped grass, stones and foreign objects. (3) Do not allow the oil to contaminate the track, especially when refueling or using oil to lubricate the drive chain. Take protective measures against the rubber track, such as covering the t...
  • Rubber Tracks  300X109W Excavator Tracks

    Rubber Tracks 300X109W Excavator Tracks

    Product Detail The Feature of Rubber Track When your product encounters problems, you can give us feedback in time, and we will respond to you and deal with it properly according to the regulations of our company. We believe that our services can give customers peace of mind. All our rubber tracks are made with a serial Number, we may trace the product date against the serial Number. It’s normally 1year factory warranty from production date, or 1200 working hours. Dependable top ...
  • Rubber Tracks  230X48 Mini excavator tracks

    Rubber Tracks 230X48 Mini excavator tracks

    Product Detail The Feature of Rubber Track Product Process Raw Material: Natural rubber / SBR rubber/ Kevlar fiber / Metal / Steel cord  Step: 1.Natural rubber and SBR rubber mixed together with special ratio then they will be formed as rubber block           2.Steel cord coverd with kevlar fibe           3.Metal parts will be injected with special compounds which can improve their performance           3.The rubber block , kevlar fiber cord and metal will be put on the mould in o...