Rubber tracks are made of rubber and can be used both on general roads and in a wide range of areas. Rubber tracks are made of rubber material as the main material and add appropriate amount of metal and other materials.

1. Light weight and small volume, easy to transport, install and store.

2. Good anti-slip performance, not easy to slip in use.

3. Good wear resistance and tear strength, can maintain good performance under various conditions.

4. Good impact resistance, can absorb the impact load generated when the vehicle is moving within a certain range.

5. Good elasticity and strong buffering ability can avoid the wear and tear on the road.

Superior performance

Rubber tracks are made up of many different materials, among which the common ones are rubber sheets and rubber bands. Rubber sheets are divided into different types such as three-layer structure, six-layer structure and multi-layer structure. Among them, the most common are three-layer and five-layer structures, which are suitable for various road surfaces.

1. Rubber tracks have higher impact strength than other types of rubber tracks.

2. It has better tear strength. Especially when it meets hard objects, it is not easy to tear. Even some objects that look very hard on the surface can be well protected from tearing because it has higher elasticity and stronger tear resistance.

3. The rubber track has high elasticity, so it can absorb the impact load generated when the vehicle is moving to reduce the wear and tear on the road.

4. Good anti-slip performance, able to drive on different road surfaces. The rubber track has high wear resistance, so it can greatly extend its service life.

5. The high elasticity and tear resistance enable the rubber tracks to easily absorb the impact loads generated on the road to prevent serious damage and destruction to the road.

6. With good sealing, it is not easy to produce gas leakage when the vehicle is running.

7. Long service life, once invested can be used for more than 20 years. This is one of the biggest advantages of rubber tracks! 

Long life span

1. Rubber tracks have a long service life because they are very wear resistant and flexible. Many users find that the service life is much longer than ordinary rubber tracks, mainly because of the long service life.

2. The rubber tracks can be customized according to the needs of customers and can also be manufactured according to the needs of users. This is very convenient for users.

3. The light weight and small size of rubber tracks make them easy to transport, install and store, and they can maintain good performance under various conditions.

5. The rubber track has good elasticity and strong cushioning ability, which can avoid the wear and tear on the road.

6. Rubber tracks are corrosion-resistant, heat-resistant and anti-aging, so they can maintain good performance under various conditions. 

No slippage

The rubber track is composed of two steel belts, one covering the other, which are connected by a retaining pin. There is a groove at the joint of the two steel belts, and when the two steel belts fit closely together, a strong friction force is generated. This friction is less likely to slip when walking and can ensure smooth vehicle movement.

A large contact area between the rubber track and the road, with good anti-slip properties.

Rubber tracks are thicker than normal plastic tracks, more wear-resistant and longer-lasting than steel tracks.

The rubber tracks have a better load capacity, with a load capacity of 20 tons or more.

Rubber tracks also have the following advantages.

1. Good elasticity and buffering capacity: rubber tracks can absorb shocks and vibrations and reduce the damage to the road.

2. can make the wheels remain stable when moving and improve the driving performance of the vehicle.

3. Since rubber has a good modulus of elasticity, it is 5 to 10 times higher than that of steel. It also has a lower center of gravity since it is much lighter than steel.

4. The rubber material has a large coefficient of volume expansion and thermal conductivity, so it has good thermal insulation performance. 

High and low temperature resistance

1.The rubber tracks can withstand ambient temperature from -20℃ to 60℃, with wide working temperature range.

2.The rubber track has good resistance to oil, acid, alkali and humidity and heat, and it also has good insulation performance.

4. The rubber tracks have high wear resistance, so that they can be repaired and replaced quickly after wear and tear, so that the vehicle can run normally.

5.The rubber track is cold resistant, can keep elasticity in low temperature, not easy to tear or break.

6.The rubber track has good thermal conductivity and insulation performance, which is suitable for open-air operation. Therefore it can reduce the heat loss of the vehicle during the driving process.

7. Rubber tracks have excellent chemical and corrosion resistance, so it can prevent corrosion, rust and other corrosive conditions from occurring during the use of the vehicle. 

Wear-resistant and durable

Rubber tracks have good wear resistance, tear resistance, corrosion resistance and heat resistance, excellent oil resistance, chemical resistance and aging resistance, and can maintain good use performance under different conditions. Between -50℃~+80℃, it can maintain high strength and hardness, and has good wear resistance.

In the process of rubber track production, you need to pay attention to choosing the right temperature and humidity for it. If the temperature is too high, it will crack; if the humidity is too high, it will easily cause the rubber tracks to crack. Therefore, the rubber tracks need to be dried effectively so that they can be produced indoors. It is also necessary to ensure that the humidity of the rubber tracks is low, because if the moisture content is too high, it will cause deformation of the rubber tracks. In addition, in order to ensure the normal operation of rubber tracks, attention should be paid to avoiding production work in rain and snow. 

Wear-resistant, good shock absorption performance

The rubber tracks can be driven directly on concrete and can resist the impact from the ground, so they can adapt to various road conditions.

Rubber tracks are suitable for all types of roads and slopes, but have some limitations for sand, grass and soft ground. The track travel speed is relatively low, with a maximum speed of 15 km/h. In addition, due to the thinness of the rubber tracks, the vehicle tends to slip at high speeds.

Rubber tracks are suitable for use in dry, abrasive and muddy environments. Rubber tracks are made of elastomers or synthetic fibers, but they can also improve performance by adding other materials. Compared to steel plates, rubber offers better wear resistance and better vibration damping.

Since rubber has excellent elasticity and high wear resistance, rubber tracks can withstand more load (wear faster under high load) and remain undamaged for a longer period of time (life span of about several years). 

It has good elasticity and strong cushioning performance.

Rubber tracks have better elasticity than other tracks, so the tracks will break in less time, thus extending the service life.

The rubber tracks have excellent elasticity and cushioning properties and are characterized by.

1. good elasticity can absorb the impact and good shock absorption.

2. non-corrosive to metals and can be used in many environments.

3. not easily damaged, with good wear resistance.

4. Long life span.

Rubber track is a kind of track made of rubber. It has good elasticity and cushioning performance, which can absorb impact and avoid wear and tear. At the same time, it has good wear resistance and corrosion resistance.